Switch lights
Turn a group on or off.
All 4 hue supports the following actions for alarms, timers and rules.
The following actions are related to groups, i.e. rooms, zones and lightgroups. Actions cannot be applied to individual lights. If you want to influence a single light with an action, create a new lightgroup or zone that only contains the light you want and select this lightgroup.
Turn a group on or off.
Set the color of a group.
Change the color of a group. The change in color must be specified in the X and Y parameters according to the CIE color model.
Set the color temperature of a group.
Change the color temperature of a group. The change in color temperature must be specified in Kelvin.
Allow the lights in the group to flash either once or multiple times.
Start or stop the interal light color loop for all lights in the group.
Set the brightness of a group.
Change the brightness of a group. The change of the brightness must be specified in percent.
The following actions are related to scenes.
Activate a selected scene.
The current light configurations of the lights are saved in the selected scene. The configuration of the scene is overwritten.
The following actions are related to internal memory sensors or attached hardware.
Turn a sensor on or off. If a sensor is switched off, it does not report any events, i.e. when the Hue dimmer is switched off, for example, button presses are no longer recognized.
The specified value is written to the selected memory sensor.
The specified flag is written to the selected memory sensor.
The following actions are related to timers.
A timer is started or stopped. This is useful for performing another delayed action through a timer, such as resetting a memory sensor.